Đề Thi FE SWT301 - SU26 - FE - RE

[adminadmin is verified member.]

Học kỳ

SU2026

Thời Gian

3/8/26

Loại tài liệu

FE

Mã Đề

SWT301_SU26_RE_930316

SWT301_SU26_RE_930316

Bộ câu hỏi ôn tập và kiểm tra môn kiểm thử phần mềm​

Tài liệu này cung cấp hệ thống câu hỏi trắc nghiệm phong phú xoay quanh các khái niệm nền tảng trong kiểm thử phần mềm như quy trình phát triển, các cấp độ và kỹ thuật kiểm thử. Người học có thể ôn luyện về quản lý lỗi, công cụ tự động hóa, tiêu chuẩn chất lượng cũng như các phương pháp đánh giá tĩnh và động. Nội dung được thiết kế sát với chương trình học giúp học viên củng cố kiến thức và chuẩn bị tốt cho các kỳ thi đánh giá năng lực.

SWT301 Multiple Choice Questions​

Question 1
(Choose 1 answer)
Against which of the following would incidents normally NOT be raised?
A. Requirements
B. Documentation
C. Test cases
D. Improvements suggested by users

Question 2
(Choose 1 answer)
Exclusive use of white box testing in a test-phase will:
A. Ensure the test item is adequately tested
B. Make the need for black-box testing redundant.
C. Run the risk that the requirements are not satisfied.
D. Suffices for the unit testing phase

Question 3
(Choose 1 answer)
The principal attributes of tools and automation are (choose one answer)
A. (1) Speed & efficiency
B. (2) Accuracy & precision
C. Both of (1) and (2)
D. None of (1) nor (2)

Question 4
(Choose 1 answer)
Match every stage of the software Development Life cycle with the Testing Life cycle:
i. Hi-level design
ii. Code
iii. Low-level design
iv. Business requirements
a. Unit tests
b. Acceptance tests
c. System tests
d. Integration tests
A. i-d, ii-a, iii-c, iv-b
B. i-c, ii-d, iii-a, iv-b
C. i-b, ii-a, iii-d, iv-c
D. i-c, ii-a, iii-d, iv-b

Question 5
(Choose 1 answer)
What type of tools to be used for Regression Testing ?
A. (1) Performance
B. (2) Record/Playback
C. Both of (1) and (2)
D. None of (1) nor (2)

SWT301 Multiple Choice Questions​

Question 6
(Choose 1 answer)

The later in the development life cycle a fault is discovered, the more expensive it is to fix. Why?
A. The documentation is poor, so it takes longer to find out what the software is doing.
B. Wages are rising
C. The fault has been built into more documentation, code, tests, etc
D. None of the others

Question 7
(Choose 1 answer)

Which of the following is the component test standard?
A. IEEE 829
B. IEEE 610
C. BS7925-1
D. BS7925-2

Question 8
(Choose 1 answer)

Which test may not mimic real world situations (choose one answer)
A. (i) Functional testing
B. (ii) Structural Testing
C. Both of (i) and (ii)
D. None of (i) nor (ii)

Question 9
(Choose 1 answer)

Which of these are objectives for software testing?
A. Determine the productivity of programmers
B. Eliminate the need for future program maintenance
C. Eliminate every error prior to release
D. Uncover software errors

Question 10
(Choose 1 answer)

Defects discovered by static analysis tools include:
i. Variables that are never used.
ii. Security vulnerabilities.
iii. Programming Standard Violations
iv. Uncalled functions and procedures
A. i, ii, iii, iv is correct
B. iii ,is correct I,ii,iv are incorrect.
C. i, ii, iii and iv are incorrect
D. iv, ii is correct

SWT301 Multiple Choice Questions​

Question 11
(Choose 1 answer)
Which of the following benefits are MOST likely to be achieved by using test tools?
i) Easy to access information about tests and testing.
ii) Reduced maintenance of testware.
iii) Easy and cheap to implement.
iv) Greater consistency of tests.
A. ii and iv
B. ii and iii
C. i and iv
D. i and iii

Question 12
(Choose 1 answer)
What determines the level of risk?
A. The cost of dealing with an adverse event if it occurs.
B. The probability that an adverse event will occur.
C. The amount of testing planned before release of a system.
D. The likelihood of an adverse event and the impact of the event.

Question 13
(Choose 1 answer)
Which of the following is NOT a type of non-functional test?
A. State-Transition
B. Usability
C. Performance
D. Security

Question 14
(Choose 1 answer)
The person who leads the review of the document(s), planning the review, running the meeting and follow-up after the meeting
A. Reviewer
B. Author
C. Moderator
D. Auditor

Question 15
(Choose 1 answer)
Reviews, static analysis and dynamic testing have the same objective
A. (i) Identifying defects.
B. (ii) Fixing defects.
C. (i) and (ii)
D. None of (i) nor (ii)

SWT301 Multiple Choice Questions​

Question 16
(Choose 1 answer)
PDCA is known as
A. Plan, Do, Check, Act
B. Plan, Do, Correct, Act
C. Plan, Debug, Check, Act
D. Plan, Do, Check, Accept

Question 17
(Choose 1 answer)
Which of the following statements are true?
A. Faults in program specifications are the most expensive to fix
B. Faults in code are the most expensive to fix
C. Faults in requirements are the most expensive to fix
D. Faults in designs are the most expensive to fix

Question 18
(Choose 1 answer)
When should you stop testing?
A. When time for testing has run out
B. When all planned tests have been run
C. When the test completion criteria have been met
D. When no faults have been found by the tests run

Question 19
(Choose 1 answer)
Where may functional testing be performed?
A. At system and acceptance testing levels only
B. At all test levels
C. At all levels above integration testing
D. At the acceptance testing level only

Question 20
(Choose 1 answer)
Which of the following activities should be performed during the selection and implementation of a testing tool?
i) Investigate the organisation's test process.
ii) Conduct a proof of concept.
iii) Implement the selected tool on a project behind schedule to save time.
iv) Identify coaching and mentoring requirements for the use of the selected tool.
A. i, ii, iii
B. ii, iii, iv
C. i, iii, iv
D. i, ii, iv

SWT301 SU26 Final Exam Questions 21 to 25​

Question 21
(Choose 1 answer)

With thorough testing it is possible to remove all defects from a program prior to delivery to the customer.
A. True
B. False

Question 22
(Choose 1 answer)

Defect Management process does not include
A. Defect prevention
B. Deliverable base-lining
C. Management reporting
D. None of the others

Question 23
(Choose 1 answer)

Which of these can be successfully tested using Loop Testing methodology (choose one answer)?
A. Simple Loops
B. Nested Loops
C. Concatenated Loops
D. All of the others

Question 24
(Choose 2 answers)

Which TWO of the following statements about static analysis are correct?
A. Compiling code is not a form of static analysis
B. Static analysis need not be performed before imperative code is executed
C. Static analysis can find faults that are hard to find with dynamic testing.
D. Extensive statistical analysis will not be needed if white- Box testing is to be performed.

Question 25
(Choose 1 answer)

Which type of testing focuses on evaluating quality attributes such as security, performance, reliability, and usability in an Internet banking system?
A. System integration
B. Functional testing
C. Non-functional testing.
D. Requirements testing

SWT301 Multiple Choice Questions​

Question 26
(Choose 1 answer)
The purpose of exit criteria is: (choose one answer)
A. Define when to stop testing
B. End of test level
C. When a set of tests has achieved a specific pre condition
D. All of the others

Question 27
(Choose 1 answer)
Match the following:
1. Test estimation
2. Test control
3. Test monitoring
a. Measures of tracking process
b. Effort required to perform activities
c. Reallocation of resources
A. 1 -b, 2-c, 3-a
B. 1 -b, 2-a, 3-c
C. 1 -c, 2-a, 3-b
D. 1 -a, 2-b, 3-c

Question 28
(Choose 1 answer)
Which tool will be used to test the flag memory leaks and unassigned pointers
A. Dynamic analysis tool
B. Static Analysis tool.
C. Maintenance tool.
D. Configuration tool.

Question 29
(Choose 1 answer)
The place to start if you want a (new) test tool is:
A. Attend a tool exhibition
B. Invite a vendor to give a demo
C. Analyze your needs and requirements
D. Find out what your budget would be for the tool
E. Search the internet

Question 30
(Choose 1 answer)
Increasing the quality of the software, by better development methods, will affect the time needed for testing (the test phases) by:
A. Reducing test time
B. No change
C. Increasing test time
D. Can't say

SWT301 Multiple Choice Exam Questions​

Question 31
(Choose 1 answer)

Which of the following is not a quality characteristic listed in ISO 9126 Standard?
A. Functionality
B. Usability
C. Supportability
D. Maintainability

Question 32
(Choose 1 answer)

Which of the following is not included in Test Plan.
A. Features to be tested.
B. Environmental needs.
C. Suspension criteria.
D. Expected results.

Question 33
(Choose 1 answer)

One of the fields on a form contains a text box which accepts alpha numeric values. Identify the Valid Equivalence class
A. BOOK
B. Book
C. Boo01k
D. book

Question 34
(Choose 1 answer)

Which of the following BEST describes the difference between an inspection and a walkthrough?
A. Both inspections and walkthroughs are led by the author.
B. An inspection is led by a moderator and a walkthrough is led by the author.
C. Both inspections and walkthroughs are led by a trained moderator.
D. A walkthrough is led by the author. The author is not present during inspections.

Question 35
(Choose 1 answer)

Handover of Testware is a part of which Phase
A. Test Analysis and Design
B. Test Planning and control
C. Test Closure Activities
D. Evaluating exit criteria and reporting

SWT301 Multiple Choice Questions​

Question 36
(Choose 1 answer)
Which expression best matches the following characteristics or review processes:
1. Led by author
2. Undocumented
3. No management participation
4. Led by a trained moderator or leader
5. Uses entry exit criteria
s) Inspection
t) Peer review
u) Informal review
v) Walkthrough
A. s = 4, t = 3, u = 2 and 5, v = 1
B. s = 4 and 5, t = 3, u = 2, v = 1
C. s = 1 and 5, t = 3, u = 2, v = 4
D. s = 5, t = 4, u = 3, v = 1 and 2
E. s = 4 and 5, t = 1, u = 2, v = 3

Question 37
(Choose 1 answer)
Testing wherein we subject the target of the test, to varying workloads to measure and evaluate the performance behaviors and ability of the target and of the test to continue to function properly under these different workloads.
A. Load Testing
B. Integration Testing
C. System Testing
D. Usability Testing

Question 38
(Choose 1 answer)
Cost of the reviews will not include.
A. Review process itself
B. Metrics analysis
C. Tool support.
D. Process improvement.

Question 39
(Choose 1 answer)
Which of the following is not a static testing technique?
A. Error guessing
B. Walkthrough
C. Data flow analysis
D. Inspections

Question 40
(Choose 1 answer)
The Planning phase of a formal review includes which of the followings?
A. Explaining the objectives
B. Selecting the personnel, allocating roles.
C. Follow up
D. Individual Meeting preparations

SWT301 Multiple Choice Questions​

Question 41
Code Coverage is used as a measure of what?
A. Defects
B. Trends analysis
C. Test Effectiveness
D. Time Spent Testing

Question 42
Which is not the testing objectives
A. Finding defects
B. Gaining confidence about the level of quality and providing information
C. Preventing defects.
D. Debugging defects

Question 43
Which of the following tools would be involved in the automation of regression test?
A. Data tester
B. Boundary tester
C. Capture/Playback
D. Output comparator.

Question 44
_____ includes both Black box and White Box Testing features (choose one answer)
A. (i) Gray Box Testing
B. (ii) Hybrid Testing
C. Both of (i) and (ii)
D. None of (i) nor (ii)

Question 45
Who are the persons involved in a Formal Review
i) Manager
ii) Moderator
iii) Scribe / Recorder
iv) Assistant Manager
A. i,ii,iii,iv are true
B. i,ii,iii are true and iv is false.
C. ii,iii,iv are true and i is false.
D. i,iv are true and ii, iii are false.

SWT301 Multiple Choice Questions​

Question 46
(Choose 1 answer)
Which of the following has highest level of independence in which test cases are:
A. Designed by persons who write the software under test
B. Designed by a person from a different section
C. Designed by a person from a different organization
D. Designed by another person

Question 47
(Choose 1 answer)
Success Factors for a review include:
i. Each Review does not have a predefined objective
ii. Defects found are welcomed and expressed objectively
iii. Management supports a good review process.
iv. There is an emphasis on learning and process improvement.
A. ii,iii,iv are correct and i is incorrect
B. iii , i , iv is correct and ii is incorrect
C. i , iii , iv , ii is in correct
D. ii is correct

Question 48
(Choose 1 answer)
In a review meeting a moderator is a person who
A. Takes minutes of the meeting
B. Mediates between people
C. Takes telephone calls
D. Writes the documents to be reviewed

Question 49
(Choose 1 answer)
Which of the following is a Key Characteristics of WalkThrough
A. Scenario , Dry Run , Peer Group
B. Pre Meeting Preparations
C. Formal Follow Up Process
D. Includes Metrics

Question 50
(Choose 1 answer)
One of the following is not a part of white box testing as per BS7925-II standards.
A. Random testing
B. Data Flow testing.
C. Statement testing
D. Syntax testing

SWT301 Multiple Choice Questions​

Question 51
(Choose 1 answer)
A typical commercial test execution tool would be able to perform all of the following, EXCEPT:
A. Generating expected outputs
B. Replaying inputs according to a programmed script
C. Comparison of expected outcomes with actual outcomes
D. Recording test inputs
E. Reading test values from a data file

Question 52
(Choose 1 answer)
An incident logging system
A. Only records defects
B. Is of limited value
C. Is a valuable source of project information during testing if it contains all incidents
D. Should be used only by the test team.

Question 53
(Choose 1 answer)
Measurement dysfunction is a problem because:
A. Even though the numbers you look at appear better, to achieve these numbers, people are doing other aspects of their work much less well.
B. We don't know how to measure a variable (our measurement is dysfunctional) and so we don't know how to interpret the result.
C. You are measuring the wrong thing and thus reaching the wrong conclusions.
D. All of the others

Question 54
(Choose 1 answer)
Which of the following is the standard for the Software product quality
A. ISO 9126
B. ISO 829
C. ISO 1012
D. ISO 1028

Question 55
(Choose 1 answer)
Boundary value testing
A. Is the same as equivalence partitioning tests
B. Test boundary conditions on, below and above the edges of input and output equivalence classes
C. Tests combinations of input circumstances
D. Is used in white box testing strategy

SWT301 Multiple Choice Questions​

Question 56
Component Testing is also called as
i) Unit Testing
ii) Program Testing
iii) Module Testing
iv) System Component Testing.
A. i,ii,iii are true and iv is false
B. i,ii,iii,iv are false
C. i,ii,iv are true and iii is false
D. All of them are true

Question 57
Software quality is not relevant to _____
A. Correctness
B. Usability
C. Viability
D. Reusability

Question 58
Who is responsible for document all the issues, problems and open point that were identified during the review meeting
A. Moderator
B. Scribe
C. Reviewers
D. Author

Question 59
When a new testing tool is purchased, it should be used first by:
A. A small team to establish the best way to use the tool
B. Everyone who may eventually have some use for the tool
C. The independent testing team
D. The vendor contractor to write the initial scripts

Question 60
The Phases of formal review process is mentioned below arrange them in the correct order.
i) Planning
ii) Review Meeting
iii) Rework
iv) Individual Preparations
v) Kick Off
vi) Follow Up
A. i,ii,iii,iv,v,vi
B. vi,i,ii,iii,iv,v
C. i,v,iv,ii,iii,vi
D. i,ii,iii,v,iv,vi